• • 上一篇    下一篇

鄂尔多斯盆地姬塬油田长7 致密油储层 微观孔喉结构分类特征

赵继勇1,2 刘振旺2 谢启超1,2 周静萍2   

  1. 1 中国石油长庆油田分公司勘探开发研究院;2 低渗透油气田勘探开发国家工程实验室
  • 出版日期:2014-10-15 发布日期:2014-10-15
  • 作者简介:赵继勇(1968-),男,甘肃庆阳人,博士,2009 年毕业于中国科学院,高级工程师,主要从事低渗致密油藏开发技术研 究与管理工作。地址:陕西省西安市未央区长庆兴隆园小区勘探开发研究院,邮政编码:710018。E-mail: zjy_cq@petrochina.com.cn
  • 基金资助:
    中国石油天然气股份有限公司重大科技攻关项目“鄂尔多斯盆地致密油勘探开发关键技术研究”(2011E-2602)。

Micro Pore Throat Structural Classification of Chang 7 Tight Oil Reservoir of Jiyuan Oilfield in Ordos Basin

Zhao Jiyong1,2, Liu Zhenwang2, Xie Qichao1,2, Zhou Jingping2   

  1. 1 Exploration and Development Research Institute of PetroChina Changqing Oilfield Company; 2 National Engineering Laboratory for Exploration and Development of Low-Permeability Oil & Gas Fields
  • Online:2014-10-15 Published:2014-10-15

摘要: 致密油储层微观孔喉结构特征是致密油储层研究的重点和难点,也是制约致密油开发的关键。以鄂尔 多斯盆地姬塬油田安83 区长7 致密油储层为例,通过镜下观察和压汞实验对储层微观孔喉结构进行了分析。镜下观 察该区孔隙类型主要为长石溶孔和粒间孔,喉道类型以弯片状、片状以及管束状喉道为主;压汞曲线显示排驱压力和 中值压力偏高,中间过渡段相对较陡,喉道中值半径偏小,分选较好。孔喉结构的非均质性是决定致密储层渗流特征 及其差异的主要因素,通过对孔喉分布、孔喉大小、连通性三方面参数与物性之间的相关性分析,表明孔喉分布特征 参数中的分选系数、大小特征参数中的孔喉体积比、连通特征参数中的退汞效率与物性相关性最好,据此建立了适合 致密油储层的分类评价标准,以指导致密油储层产能评价及相关措施优化。

Abstract: The characteristics of micro pore throat structure of tight oil reservoirs are the bottleneck in study of tight oil reservoir. It also holds the key to tight oil development. Take Chang 7 tight oil reservoir in An-83 block of Jiyuan oilfield in Ordos Basin for instance. Based on microscopic observation and mercury intrusion experiment, micro pore throat structure of the reservoir is brought under analysis. Microscopic observation indicate that the main types of pores in this zone are feldspar dissolution pore and intergranular pore, while the types of throat are mainly tortuous sheet shape, sheet shape and bundled tube. The intrusive mercury curves indicate that the expulsion pressure and median value pressure are relatively high, with the curves having a higher pitch of intermediate section and a low throat radius. Heterogeneity of pore throat structure is the main factor to determine the filtration characteristics and differences of tight oil reservoir. The analysis of the correlations between parameters and physical properties in three areas of pore distribution, pore sizes and pore connectivity indicate that the sorting coefficient in the parameters of pore distribution, the pore volume ratio in the parameters of pore sizes and the mercury withdrawal efficiency in the parameters of connectivity have the best correlations with the physical properties. As a result, the appropriate appraisal standards are established to classify tight oil reservoirs, helping appraise productivity of tight oil reservoirs and optimizing the relative measures.