• • 上一篇    下一篇

塔里木轮古西奥陶系碳酸盐岩岩溶孔洞 充填特征识别方法

苗 青1 常少英2 裴广平1 翟姝玲1 刘俊锋1 袁 源1   

  1. 1 中国石油塔里木油田公司勘探开发研究院,新疆库尔勒市 841000;2 中国石油勘探开发研究院 杭州地质研究院, 浙江省杭州市 310023
  • 出版日期:2014-02-15 发布日期:2014-02-15
  • 作者简介:苗青,女,硕士,2009 年毕业于北京大学,高级工程师,现从事地震综合研究工作。E-mail:miaoq-tlm@petrochina.com.cn
  • 基金资助:
    国家科技重大专项大型油气田及煤层气开发子课题塔北碳酸盐岩油藏重大开发试验sup>”(2011ZX05004)。

Method for Identification of LGX Ordovician Carbonate Karst Cave Packing Feature in Tarim

Miao Qing1, Chang Shaoying2, Pei Guangping1, Zai Shuling1, Liu Junfeng1, Yuan Yuan1   

  1. 1 Research Institute of Exploration and Development, PetroChina Tarim Oilfield Company, Korla City, Xinjiang 841000; 2 Hangzhou Research Institute of Exploration and Development, PetroChina, Hangzhou City, Zhejiang 310023
  • Online:2014-02-15 Published:2014-02-15

摘要: 塔里木盆地轮古西地区奥陶系大量溶洞作为存储油气的岩溶孔洞,对该区产能建设具有举足轻重的作用。 钻井证实,该区油气主要分布于潜山顶面以下50m 范围内,但这个领域也是岩溶孔洞充填较为严重的地方。在常规 地震剖面上,充填洞穴及未充填洞穴均表现串珠状反射特征,仅靠单一的地球物理手段很难识别出有效储层。通 过对工区内多口井的岩心观察,结合地球物理响应特征,通过模型正演,划分出不同盖层条件下的溶洞充填相,并利 用频谱分析技术,识别出有效储层的反射特征,在实际生产中得到较好应用。

Abstract: A large quantity of Ordovician krast caves in Lunguxi (LGX) region of Tarim Basin act as krast vugs to hold oil and gas, exerting a great influence on the productivity in this region. The drilling results showed that oil and gas in this region were distributed mainly less than 50 meters below the top surface of buried hill. However, krast caves are seriously packed in this area. On the conventional seismic profile, the caves both packed and unpacked show beaded reflective characteristics. It is difficult to identify the effective reservoir by means of a single geophysical method. Based on observation of cores from a number of wells in the operational zone and combined with the geophysical response characteristics and forward model, the packed krast caves under different cap-rock conditions were distinguished. The reflective characteristics of effective reservoir can be identified with the help of frequency spectrum analysis technology. This method has achieved good results in actual application.